PowerTap Joule 3.0 - Manual (Page 66)

Joule 3.0 User Guide page 66
Chapter 8: Setting Up User
Setting Up User Profi le
Setting up a user profi le is important for Joule 3.0 to display the most accurate information. A
user profi le can be set up and managed using PowerAgent software. Note: if using Joule 3.0 in
group environment, a USB stick will store user information.
1. Press and release [MODE] until Menu mode is displayed.
2. Press [JOYSTICK] up/down to highlight Setup User. Press [JOYSTICK] in and release to select Setup User.
3. Press [JOYSTICK] in and release to select Name. Press [JOYSTICK] up/down to spell desired user name. Press
[JOYSTICK] in and release to save changes.
4. Press [JOYSTICK] up/down to highlight Weight. Press [JOYSTICK] in and release to select Weight. Use [JOY-
STICK] to toggle appropriate user weight. Calculations such as: watts/kg and accurate target slope resistance
require correct user weight. Press [JOYSTICK] in and release to save changes.
5. Press [JOYSTICK] up/down to highlight Height. Press [JOYSTICK] in and release to select Height. Use [JOY-
STICK] to set appropriate user height. Press [JOYSTICK] in and release to save changes.
6. Press [JOYSTICK] up/down to highlight Date of Birth. Press [JOYSTICK] in and release to select Date of Birth.
Use [JOYSTICK] to set appropriate date of birth. Press [JOYSTICK] in and release to save changes.
Name: >
New User >
Active: >
X >
Weight - lbs: >
XXX >
Height - in: >
XXX >
Date of Birth: >
Feb 02 1974 >
Gender: >
>
Male
Power Zones >
HR Zones >
The Gun Show >
Auto Zero >
Power Zones >
HR Zones >
Pair New Sensor >
Back <
Menu
Setup User Setup User Setup User