PowerTap Joule 3.0 - Manual (Page 11)

Joule 3.0 User Guide page 11
CycleOps (ANT+) Heart Rate Strap
Wearing the heart rate strap, position it above torso as pictured. The
strap should rest just beneath the pectoralis muscles of the chest. For
best results slightly moisten the electrodes where contact is made with
skin. The heart rate strap must be worn to enable the heart rate func-
tion. It should be snug enough to stay in place during the ride.
NOTE: Joule 3.0 is compatible with any ANT+ compatible heart rate
strap. The CycleOps heart rate strap contains a user replaceable
CR2032 battery; with an expected life of three years, assuming one
hour of use per day. After replacing sensor battery, Joule must be re-
paired to heart rate sensor. See Sensor section on page 48.
Chapter 1: Starting Out
Band
Front of Heart Rate Strap
Back of Heart Rate Strap
Electrodes
Electrodes
Battery Door