PowerTap Joule 3.0 - Manual (Page 62)

Joule 3.0 User Guide page 62
Chapter 7: Setting Up CycleOps Joule 3.0 ™
Setting Up Display...continued
18. Press [JOYSTICK] up/down to highlight Speed With Zeros. Press [JOYSTICK] in and release to select Speed
With Zeros.
19. Press [JOYSTICK] up/down to change Speed With Zeros from Yes to No. Press [JOYSTICK] in and release to
save settings. Note: Speed With Zeros set to Yes will calculate all average speed data with zeros included, Speed
With Zeros set to No will calculate all average speed data without zeros. Press [JOYSTICK] in and release to save
changes.
20. Press [JOYSTICK] up/down to highlight Language. Press [JOYSTICK] in and release to select Language.
21. Press [JOYSTICK] up/down to change Language. Press [JOYSTICK] in and release to save changes.
22. Press [JOYSTICK] up/down to highlight Units. Press [JOYSTICK] in and release to select Units. Press [JOY-
STICK] in and release to save changes.
23. Press [JOYSTICK] up/down to change Units. Press [JOYSTICK] in and release to select between English and
Metric. Press [JOYSTICK] in and release to save changes.
Backlight Level: >
2
Backlight Time (sec):
Contrast:
5
>
Zero averaging: >
With >
Power Avg (sec): >
1 >
Cadence Avg (sec): >
>
1
Speed Avg (sec):
>
1 >
Language: >
English >
Units: >
English >
Pair New Sensor >
Menu INT
Displa Displayy
10 10
Back <