Ag Leader EZ-Guide - Manual (Page 2)

EZ-Guide™ Ag Leader Technology ® EZ-Guide™
Button Functions
Press Shift Key and then function
key to perform function in yellow
part or top half of key.
Set A – Start reference pass
Set B – End reference pass
Reset reference pass
Pause or Resume Guidance
Clear Area Points
Add Area Point
Select Guidance, Area or
Configuration Mode
Accept Configuration setting
Decrease pass number
Increase pass number
-or-
Scroll through configuration
items or values when in
configuration mode.
. Calculating Area
To calculate the acreage of your field, drive the
perimeter of the field and press at each corner of
the field. To view area later, press until
"Area" is displayed. To clear Area, press
To return to guidance press twice or until
“Guide” is displayed.
Tip
Area points must be added in order as you drive the
perimeter of the field. Acreage calculations are
based on outside edge of the swath. A maximum of
99 corner points can be set.
Area is displayed after
the third point is set.
Brightness of Display
Press and hold Shift Key until desired
brightness level is achieved.
Ag Leader Technology
2202 S. Riverside Dr.
Ames, IA 50010
515-232-5363 ext. 1 – Technical Support
515-232-3595 – fax
For Additional Information, Tips and Troubleshooting
visit our web site.
www.agleader.com/ez-guide.htm
1.
2.
3.
4.
5.
6.
Return to Step 2 or press until
"Guide" is displayed.
Configuration Options
WIDTH: Set swath width to slightly less than the
total boom width. (About 1 foot, ensures no skips)
LED MODE: Chase or Pull
SPACING: Distance represented by one LED
HLNDWARN: Distance at which Approach Led
will indicate headland
XTE WARN Distance off-swath at which the alarm
sounds
BMOFFSET Distance of boom in front or behind
LKAHEAD: Look ahead time in seconds. Default is
1 sec. 0 to 8 mph – 1sec 8 to 15 mph 2 sec
MOUNT: DASH or CEILING
TEXT: Guidance display: SWTH&XTE – swath
number and cross-track error. SWTH&SPD – swath
number and current speed. HDG&SPD – current
heading and speed. DEMO – sales demo mode.
SNAPSWTH: ON – snap to swath is on, Lightbar
automatically guides to nearest swath. OFF – snap
to swath is off, use -/+ keys to change swath
DIFF SRC: Location of differential satellite
DIFF GPS: AUTO – Guidance without differential
correction allowed, no warning.
UNITS: US – feet, miles per hour, acres. METRIC
– meters, Kilometers per hour, hectares.
Language: English Espanol Portuges
DEFAULTS: Return all configurations settings
to factory defaults
.
Accept new configuration
settings
Display configuration setting
Change configuration setting
To configure, press the following
keys until CONFIG appears
Select Configuration Option