Ag Leader InSight Raven Serial, NL Mark V, SP6 - Manual (Page 5)

Operation
Step
1
Press the RUN button to enter your main operating screen
(located on the lower right hand side of the display.)
Press the FIELD button to select which field you will be logging to.
Select the appropriate Grower, Field, Operating
Configuration, and Product from the lists. If your item is not
listed, refer to the appropriate section in this guide to set it
up. If you are applying the same product multiple times
during a single season, you can create a new Operational
Instance by pressing the Change button next to Operational
Instance. Step
2a
Press the ACCEPT button when finished.
Step
2
Step
2b If data has not been logged to the current field, a window to
select the Region will appear. The name may be edited by
selecting the EDIT NAME button or you may press
ACCEPT to use the default.
Note: To setup the Raven serial port go under the Data Menu key:
bAUd=9600, triG=1, Unit=sec, dLoG=On (rATE=Off to turn off rate change
alarm)
PN 2002831-33 Insight Quick Reference Raven Controllers (September 2005) 5 of 5