HP OneView for VMware vCenter - Manual (Page 44)

•
Virtual Disk Allocated Capacity: Disk capacity reserved by VMware for the VMDK or RDM
For an RDM, this value will match the provisioned capacity value. For a VMDK, this value
might be less than the provisioned capacity value if VMware thin provisioning is used. This
is separate from thin provisioning configured in the storage array.
•
VMware Thin: Thick or thin
•
Virtual Machine: Name of the VM associated with the selected VMDK or RDM
Viewing hosts
The Hosts tab is displayed in the HP Insight Software tab for selected VMs and datastores.
Figure 20 Hosts tab
This tab displays the following information:
•
Name: Host name
•
Multiple Paths: A Yes or No value that indicates whether all disks have multiple paths configured
and visible on the host
•
Current Owner: A Yes or No value that indicates whether the VM is active on the host
Viewing HBAs
The HBAs tab is displayed in the HP Insight Software tab for selected hosts.
Figure 21 HBAs tab
This tab displays the following information:
•
VMware Device Identifier: HBA identifier assigned by VMware
•
Type: HBA type
•
WWN/IQN: HBA WWN
Viewing paths
The Paths tab is displayed in the HP Insight Software tab for selected hosts, VMs, and datastores.
44 Using Insight Control for vCenter