HP iPAQ hw6500 Unlocked Mobile Messenger series - Manual (Page 97)

Using Bluetooth 9–13
4. From the Bluetooth Browser screen, select the computer you
want to synchronize with, and tap Next.
5. Under Shortcut creation, create a shortcut name for this
connection, and then tap Finish.
NOTE: If you are setting up the ActiveSync partnership with an Evo
Notebook or Desktop computer, select the name you typed in Step 7 of
“Using the HP Bluetooth Multiport Module for Evo Notebooks and
Desktops.”
.N
Establishing a Serial Connection
Use the wireless Bluetooth serial port connection just as you would a
physical serial cable connection. You must configure the application that
will use the connection to the correct serial port.
To establish a serial connection:
1.
From the Today screen, tap the iPAQ Wireless icon >
Bluetooth > Manager.
2. Tap New > Explore a Bluetooth device > Next.
3. Tap the device name as it appears on the screen.
4. Follow the connection wizard instructions.
Dial-Up Networking Service
Use dial-up networking (DUN) to connect to the internet from another
Bluetooth device through your HP iPAQ.
Using Dial-Up Networking Service
NOTE: An activated SIM card must be inserted in your HP iPAQ and the
phone must be turned on before beginning this process.
To connect to a device that provides phone or modem access:
1.
You must first pair the two devices. For more information, see the
section on ”Pairing Devices” in this chapter.