HP iPAQ hw6500 Unlocked Mobile Messenger series - Manual (Page 80)

Making Data Connections 7–5
5. In the Proxy server box, enter the proxy server name.
6. To change port number, tap the Advanced button and enter the
number in the HTTP proxy box.
7. Tap OK to exit the program.
Depending on where you are in the program, you may have to tap
OK several times to exit.
Managing Your E-mail
You can send and receive e-mail messages by connecting directly to an
e-mail server using GSM/GPRS. If you have already created a
connection to a network or an ISP, you must still set up an e-mail
account in Messaging. To set up your e-mail account, see
Chapter 12, “Using Messaging.”
NOTE: The network or ISP connection must use a POP3 or IMAP4 e-mail
server and an SMTP gateway.
Entering an Internet Address
With Pocket Internet Explorer and a connection to the Internet, you can
view Web sites on your HP iPAQ by typing an Internet address in the
Address bar.
NOTE: Some Web content may require installation of
additional software.
To enter an Internet address on your HP iPAQ:
1.
From the Start menu, tap Internet Explorer > Address Bar.
NOTE: If the Address Bar is not visible, tap the View tab > Address
Bar to turn it on.
2. Enter the Internet address in the Address bar.