HP SAN - Manual (Page 24)

Figure 10 Customer Details window
.
Adding contact details
To add your contact details, complete the following steps:
1. Click Customer Details from the navigation area. Customer Details window appears in the main
display area.
2. Enter your contact information in the Customer Details window.
NOTE:
Ensure that the email address you enter is accurate. SAN Visibility reports are sent to this
email address.
SAN Visibility enables you to enter multiple email address in the E-mail box. The SAN Visibility reports
are sent to all the email addresses provided.
Use semicolon (;) between the email addresses to enter multiple email address.
For example: [email protected]; [email protected]; [email protected]
1. Select Automatically email the collected raw data on completion check box. For more information,
see
Enabling auto emailing of raw data .
2. Enter your SMTP server name or select it from the SMTP Server dropdown box. For more
information, see
Determining the SMTP server IP address .
Using SAN Visibility 24