HP SAN - Manual (Page 15)

To enter the Component Group Name, complete the following steps:
1. Enter the name of your component group in the Component Group Name box. The default
component group name, MyComponentGroup, is displayed in the Component Group Name box,
as shown in
Figure 3 .
2. Click Add. The component group name appears in the SAN explorer area under the SAN name.
NOTE:
To add multiple component groups under the SAN, repeat the steps 1-2.
3. Click Next to enter the switch details.
Specifying switch details
The Switch Settings window enables you to search, add, and modify all the connected switches.
Figure 4 shows the Switch Settings window.
Figure 4 Switch Settings window
.
Adding a switch
To add a switch, complete the following steps:
1. Click Switch Settings from the navigation area. The Switch Settings window is displayed in the
main display area.
2. Select one of the following options from the main display area:
HP StorageWorks Essentials SAN Visibility 5.0 User Guide 15