HP SAN - Manual (Page 23)

• The Wbem service or the CIMServer is configured for remote access for a given user
Discovering hosts
To discover hosts, complete the following steps:
1. Select Host Settings from the navigation pane.
The Host Settings window is displayed.
2. Under Discover Host, select one of the following options:
• IP Address: Enter the IP address of the host in the IP Address field.
• Subnet: If you want to discover hosts for a range of IP addresses:
• Enter the starting IP address in the Start at IP Address field.
• Enter the limiting IP address in the Stop at IP Address field.
NOTE:
For Subnet, the host login details of all the hosts in a subnet must match the login details
specified in the Host Settings screen.
3. Enter the access information, as required, to initiate host discovery.
4. Click Discover Hosts to discover the physical hosts and the associated virtual machines.
Adding hosts
To add a host:
1. Under Add Host, select a component group from the Select Component Group list.
2. Click Add to add the selected host.
The host is added under the host node of the selected component group.
Modifying login details of a host
To modify login details of a host:
1. Select a host from the Select Component Group list.
2. Modify the login details as required.
3. Click Update.
Specifying customer details
The Customer Details window enables you to enter your contact information, your SMTP server details,
and your preferences for receiving additional HP product information.
Figure 10 displays the Customer
Details window.
HP StorageWorks Essentials SAN Visibility 5.0 User Guide 23