HP SAN - Manual (Page 18)

Removing a component group
To remove a component group from the SAN, complete the following steps:
1. Select the component group name you want to remove from the SAN explorer area.
2. Right-click and select Remove from the pop-up menu, as shown in Figure 7 .
The component group is removed from the SAN.
CAUTION:
Removing a component group removes all the switches attached to that group.
Figure 7 Removing component group
.
Renaming a component group
To rename a component group, complete the following steps:
1. Select the component group name you want to rename from the SAN explorer area.
2. Right-click and select Rename from the pop-up menu, as shown in Figure 8 .
3. Enter the component group name in the Component Group Name box in the main display area.
4. Click Rename.
The component group is renamed.
Using SAN Visibility 18