Attributes – HP NonStop G-Series User Manual
Page 252
Example: Switch Logic Board (1020.1.14)
Attributes
Switch Logic Board
Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK.
Physical
Hardware Revision The hardware revision of the switch logic board.
LED State
The state of the fault LED on the switch logic board.
Values: On, Off, Blinking
Part Number
The part number of the switch logic board.
Track ID
The track ID of the switch logic board.
Logical
Last Reset Type
The reason for last reset operation.
Values:
Hardware initiated
Soft reset button pressed
Front panel button pressed
Second Level Watchdog timer expiration
Third Level Watchdog timer expiration
Firmware initiated
Soft reset command issued
Hard reset command issued
Time of Last Soft Reset The date and time of the last processor soft reset.
Time of Last Hard Reset The date and time of the last processor hard reset.
Firmware State
The state of the switch firmware.
Values: Active, Updating, In Test, Initializing, Unknown
Firmware
Version
The VPROC of the firmware currently loaded on the switch logic board.
Default File Name
The full path name of the default firmware file on the server.
Default File Version The version of the firmware in the default firmware file.