HP NonStop G-Series - Manual (Page 219)

03 31, 32, 33
04 41, 42, 43
04 51, 52, 53
06 61, 62, 63
07 71, 72, 73
08 81, 82, 83
Path State
Value Meaning
Configure The component is not configured.
Down
The disk path is not logically accessible. In SCF, the equivalent state is
STOPPED, substate DOWN.
Exclusive Diagnostics The processor is performing diagnostics.
Exclusive
Exclusive ownership has been declared for this disk volume, and the disk is
not accessible to other users.
Format Disk format in progress.
Hard Down
The disk volume or disk path was put in this state by an OSM Abort action
or an SCF ABORT command, or it is physically inaccessible because of a
hardware error. In SCF, the equivalent state is STOPPED, substate
HARDDOWN.
Inaccessible Disk cannot be accessed.
Revival A mirrored disk is being updated.
Special Mount Only maintenance-type I/O operations can be performed on the disk.
Unknown The disk might not be responding.
Up
The disk path is logically accessible. This state is equivalent to the
STARTED state in SCF.
Power State
Powered On Meaning
On Component is powered on.
Off Component is powered off.
Possible Redundant Power Problem
There might be a problem with the backup power supply for
this component. (The Redundant Power Scrub action could not
determine the exact cause of the problem.)
Redundant Power Problem
There is a problem with the backup power supply for this
component (as determined by the Redundant Power Scrub
action).
Unknown Power state of component is unknown.