HP LaserJet Enterprise MFP M725 series - Manual (Page 191)

Configure fax receive settings
1. From the Home screen on the product control panel, scroll to and touch the Administration button.
2. Open the following menus:
● Fax Settings
● Fax Receive Settings
● Fax Receive Setup
Configure any of the following settings:
Menu item Description
Ringer Volume Touch the Ringer Volume drop-down menu and adjust the ringer volume settings.
Rings To Answer The Rings To Answer setting determines the number of times the phone rings before
the call is answered by the fax accessory.
NOTE: The default range for the available options for the Rings To Answer setting
is country/region-specific. The range of possible Rings To Answer options is limited
by country/region.
If you experience problems with the fax accessory answering, and the Rings To
Answer setting is 1, try increasing it to 2.
Fax Receive Speed Touch the Fax Receive Speed drop down menu and select one of the following
options:
● Fast (default) — v.34/max 33,600 bps
● Medium — v.17/max 14,600 bps
● Slow — v.29/max 9,600 bps
Ring Interval Touch the box beneath the Ring Interval heading to open the keypad. Enter a value
for the ring interval on the keypad, and then touch the OK button. The default
setting for ring interval is 600 ms.
Ring Frequency Touch the box beneath the Ring Frequency heading to open the keypad. Enter a
value for the ring frequency on the keypad, and then touch the OK button. The
default setting for ring frequency is 68 Hz, which detects rings up to 68 Hz.
ENWW Configure fax receive settings 177