HP OneView for Microsoft System Center User Manual
Page 45
The following are HP ProLiant Servers WMI Management Pack diagnostic script characteristics:
•
All diagnostic script output provides information about all the components on the server.
•
All diagnostic scripts run only when a state change has occurred. If a health collection stays
in the Warning state for multiple component failures at multiple times (observed with component
redundancy sets), the diagnostic script runs the first time the state change occurs only. To see
new failed components in such a situation, the script must be run manually. See
initiating diagnostic scripts” (page 23)
for more information.
•
The Log Collection Health Monitor does not have a diagnostic script.
You can see the output of these scripts from the Health Explorer for a monitor. The following is a
sample output of a script.
The following table lists all diagnostic scripts and their associated monitors in the HP ProLiant
Servers WMI Management Pack.
Run-on Health
state
Monitor name
ID: Name
HealthWarning
HP ProLiant WMI
Processors Collection
Health Monitor
HewlettPackard.Servers.ProLiant.WMI.ProcessorWarningDiagnosticScript:
HP ProLiant WMI Processor Collection Warning Diagnostic Script
HealthWarning
HP ProLiant WMI Memory
Collection Health Monitor
HewlettPackard.Servers.ProLiant.WMI.MemoryWarningDiagnosticScript:
HP ProLiant WMI Memory Collection Warning Diagnostic Script
HealthWarning
HP ProLiant WMI Cooling
Collection Health Monitor
HewlettPackard.Servers.ProLiant.WMI.CoolingWarningDiagnosticScript:
HP ProLiant WMI Cooling Collection Warning Diagnostic Script
HealthWarning
HP ProLiant WMI
Temperature Sensors
Collection Health Monitor
HewlettPackard.Servers.ProLiant.WMI.SensorWarningDiagnosticScript:
HP ProLiant WMI Sensor Collection Warning Diagnostic Script
Views
45