HP OneView for Microsoft System Center - Manual (Page 53)

•
Temp Sensors (ProLiant SNMP)
(ID=HewlettPackard.Servers.ProLiant.SNMP.HPProLiantSNMPTemperatureSensors)
•
Power Supplies (ProLiant SNMP)
(ID=HewlettPackard.Servers.ProLiant.SNMP.HPProLiantSNMPPowerSupplies)
•
Storage (ProLiant SNMP)
(ID=HewlettPackard.Servers.ProLiant.SNMP.HPProLiantSNMPServerStorage)
•
Networks (ProLiant SNMP)
(ID=HewlettPackard.Servers.ProLiant.SNMP.HPProLiantSNMPServerNetworks)
•
Management Processors (ProLiant SNMP)
(ID=HewlettPackard.Servers.ProLiant.SNMP.HPProLiantSNMPManagementProcessors)
•
Logs (ProLiant SNMP) (ID=HewlettPackard.Servers.ProLiant.SNMP.HPProLiantSNMPLogs)
•
UPS (ProLiant SNMP) (ID=HewlettPackard.Servers.ProLiant.SNMP.HPProLiantSNMPUPS)
•
Others (ProLiant SNMP)
(ID=HewlettPackard.Servers.ProLiant.SNMP.HPProLiantSNMPServerOthers)
HP ProLiant Servers WMI classes
The HP ProLiant Servers WMI Management Pack defines the following classes. Ten new HP Health
Collection classes are included in the HP ProLiant Servers WMI Management Pack, and all these
are present within the HP ProLiant Servers SNMP Management Pack.
NOTE: The UPS and Realtime Monitors are not present in the HP ProLiant Servers WMI
Management Pack.
•
Processors (ProLiant WMI)(ID=HewlettPackard.Servers.ProLiant.WMI.HPProLiantWMIProcessors)
•
Memory (ProLiant WMI)(ID=HewlettPackard.Servers.ProLiant.WMI.HPProLiantWMIMemory)
•
Cooling (ProLiant WMI)(ID=HewlettPackard.Servers.ProLiant.WMI.HPProLiantWMICooling)
•
Temp Sensors (ProLiant
WMI)(ID=HewlettPackard.Servers.ProLiant.WNI.HPProLiantWMITemperatureSensors)
•
Power Supplies (ProLiant WMI)
(ID=HewlettPackard.Servers.ProLiant.WMI.HPProLiantWMIPowerSupplies)
•
Storage (ProLiant WMI)
(ID=HewlettPackard.Servers.ProLiant.WMI.HPProLiantWMIServerStorage)
•
Networks (ProLiant WMI)
(ID=HewlettPackard.Servers.ProLiant.WMI.HPProLiantWMIServerNetworks)
•
Management Processors (ProLiant WMI)
(ID=HewlettPackard.Servers.ProLiant.WMI.HPProLiantWMIManagementProcessors)
•
Logs (ProLiant WMI) (ID=HewlettPackard.Servers.ProLiant.WMI.HPProLiantWMILogs)
•
Others (ProLiant WMI) (ID=HewlettPackard.Servers.ProLiant.WMI.HPProLiantWMIServerOthers)
•
Advanced Server Settings (ProLiant WMI)
(ID=HewlettPackard.Servers.ProLiant.WMI.HPProLiantWMIAdvancedServerSettings)
NOTE: The Advanced Server Settings is only for ProLiant DL980 G7 (with WMI data source).
Discovery rules
Each management pack has its own set of discovery rules.
Discovery rules 53