HP Systems Insight Manager - Manual (Page 84)

NOTE: Your text editor must be able create a text-only file with no embedded formatting.
4. Following the leading XML version and tool-list tags, type the tool name tag of
to define the type and
name of the tool. The revision string is used to keep track of different versions of the tool as
will be seen later. Enter the subsequent category, description, and comment elements to further
define the tool for HP SIM and the user (the description and comments will be displayed in
the GUI window for that particular tool).
5. Enter the execute-as-user element with the value of Administrator to define the user whose
permissions are allowed on the target node. After entering the execute-as-user element, the
TDEF should display as follows:
6. The include-filter element specifies which hardware and/or operating system filters will be
applied. For this example, enter the include-filter data as shown below.
7. Following the include-filter element is a block element that is the heart of the tool and includes
the command(s) to be executed. Enter the ssa block element as shown below. It will copy the
file to the specified destination and execute it there. In the example, the HP Security Patch v.1
executable is given the filename hpsecurity_patch.exe.
NOTE: The must be a directory that exists on the Managed Node. The default
file permission value used by DTF for a file copy operation is 755. If another permission is to
be used, an explicit file permission command such as chmod should be included in the copy
block element for security reasons.
8. Type the following attribute element code, which states where the tool will be located in the
HP SIM menu.
84 HP SIM custom tools