Examples of e-mail pages, Example of a standard e-mail page – HP Systems Insight Manager User Manual

Page 58

13. Select Send e-mail.

In the To address field, enter the e-mail address to which you want the notification sent
(multiple addresses can be added so that a group is notified). A CC address can also be
added so that a manager or supervisor is also notified.

In the Subject field, enter your subject. For example, HP Systems Insight Manager
Events

In the Message Format section, change the option to Pager/SMS. This option sends a
condensed e-mail format that is similar to a paging task in HP SIM, which is the ideal
way to send alerts to a cell phone type of hardware (or when Telephony Application
Programming Interface (TAPI) is not available and an e-mail-to-paging provider is being
used).

14. Click Next. The Select time filter section appears.
15. Select Use time filter and select Nights and Weekends, unless you want to receive the e-mail

24 hours per day. If so, clear Use time filter.

16. Click Next. The Review summary page appears.
17. Click Finish to create the new task.

Examples of e-mail pages

Automatic Event Handling enables you to send a system's home page URL in an e-mail address if
that system has a home page. If the system does not have a home page, then Automatic Event
Handling sends a URL that points to the HP SIM System Page of the system on the current CMS.

NOTE:

The URL specified in an e-mail message appears only if the format is set to standard.

You can send the following e-mail pages from HP SIM:

•

Standard

•

Pager/SMS

•

HTML

Example of a standard e-mail page

From: Doe, John

Sent: Wednesday, April 28, 2004 5:04 PM

To: Doe, Jane

Cc: Smith, Jim; Jones, Beth

Subject: System A: Storage System side panel is removed (Ver. 3):

Standard E-mail format

Event Name: Storage System side panel is removed (Ver. 3)

URL: https://systemname:2381

Event originator: System A

Event Severity: Major

Event received: 28-Apr-2004, 17:03:47

Event description: Storage System side panel is removed. The side

panel status has been set to removed. The storage system`s side

panel is not in a properly installed state. This situation may result

in improper cooling of the drives in the storage system due to

air flow changes caused by the missing side panel.

Event management