HP ProLiant WS460c G6 Workstation-Blade - Manual (Page 85)

Battery replacement 85
Battery replacement
If the workstation blade no longer automatically displays the correct date and time, you may need to replace
the battery that provides power to the real-time clock. Under normal use, battery life is 5 to 10 years.
WARNING: The computer contains an internal lithium manganese dioxide, a vanadium
pentoxide, or an alkaline battery pack. A risk of fire and burns exists if the battery pack is not
properly handled. To reduce the risk of personal injury:
• Do not attempt to recharge the battery.
• Do not expose the battery to temperatures higher than 60°C (140°F).
• Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water.
• Replace only with the spare designated for this product.
Before replacing a battery, you must remove any previously installed WS460c Graphics Expansion Blade
access panel and the blade.
To remove the component:
1. Power down the workstation blade (on page 14 ).
2. Remove the workstation blade (on page 15 ).
3. Remove the access panel (on page 16 ).
4. Identify the battery location (" System board components " on page 11 ).
5. Remove the battery tray.