Processor option – HP ProLiant WS460c G6 Workstation-Blade User Manual

Page 31

Hardware options installation 31

Prepare the hard drive.

Install the hard drive.

Determine the status of the drive from the hot-plug SAS hard drive LED combinations ("

" on page

Processor option

WARNING:

To reduce the risk of personal injury from hot surfaces, allow the drives and the

internal system components to cool before touching them.

CAUTION:

To prevent possible workstation blade malfunction and damage to the equipment,

multiprocessor configurations must contain processors with the same part number.

CAUTION:

To prevent possible workstation blade overheating, always populate processor

socket 2 with a processor and a heatsink or a processor socket cover and a heatsink blank.

CAUTION:

The heatsink thermal interface media is not reusable and must be replaced if the

heatsink is removed from the processor after it has been installed.

IMPORTANT:

When installing the heatsink, align the guide pins on the processor retention

bracket with the alignment holes in the heatsink.