HP ProLiant WS460c G6 Workstation-Blade - Manual (Page 35)

Hardware options installation 35
10. Press the tabs on the processor installation tool to separate it from the processor, and then remove the
tool.
11. Close the processor socket retaining bracket and the processor locking lever. The processor socket
cover is automatically ejected. Remove the cover.
CAUTION: Be sure to close the processor socket retaining bracket before closing the processor
locking lever. The lever should close without resistance. Forcing the lever closed can damage the
processor and socket, requiring system board replacement.
12. (Optional) Reinstall the WS460c Graphics Expansion Blade (" Remove the WS460c Graphics
Expansion Blade " on page 17 ), and then the access panel (" Remove the WS460c Graphics Expansion
Blade access panel " on page 17 ).