HP Color Inkjet cp1700 Printer series - Manual (Page 13)

ENWW 2-7
2 Slide the auto-duplex unit into the back of the printer until both
sides snap into place.
For information about using the auto-duplex unit, see “Two-sided
printing (duplexing).”
Step 5: Turn on the printer
1 Connect the power cord to the printer, and plug it in.
2 Press the POWER button to turn on the printer.
Step 6: Install the ink cartridges
1 If it is not already on, turn on the printer.
2 Lift the ink cartridge door.
Do not press the buttons on either side of the auto-duplex unit when
installing it. Use these buttons only for removing the auto-duplex unit
from the printer.
To prevent electric shock, connect the power cord only to a grounded
outlet. Only use the power cord that came with the printer.
EulerUG.book Page 7 Monday, July 16, 2001 5:34 PM