Auto-duplex unit (optional accessory), Setting up the printer, Step 1: check the box contents – HP Color Inkjet cp1700 Printer series User Manual
Page 10: Auto-duplex unit (optional accessory) -4, Setting up the printer -4
2-4
ENWW
7
Buttons–Push these buttons to remove the rear access panel from
the printer.
Auto-duplex unit (optional accessory)
The printer can automatically print on both sides of a sheet of paper
using a printing accessory called the auto-duplex unit. The auto-duplex
unit is a special device that attaches to the back of the printer.
1
Handles–Push these handles toward each other to remove the rear
cover from the auto-duplex unit.
2
Rear cover–Remove this cover to clear paper jams from the auto-
duplex unit.
3
Buttons–Push these buttons in to remove the auto-duplex unit
from the printer.
Setting up the printer
Step 1: Check the box contents
Refer to the Setup Poster for an illustrated guide to all the parts that
should come in the box.
The auto-duplex unit is standard with the HP Color Inkjet printer
CP1700D. You can also purchase the auto-duplex unit as an optional
accessory.
3
2
1
EulerUG.book Page 4 Monday, July 16, 2001 5:34 PM