beautypg.com

Install a jetdirect card – HP Digital Sender Flow 8500 fn1 Document Capture Workstation series User Manual

Page 87

background image

Install a Jetdirect card

To install a Jetdirect card, follow these steps.

1.

Press the Power button to turn off the product (1), disconnect power from the product (2), and then

disconnect the Ethernet cable (3).

2.

Loosen the two screws which secure the Jetdirect card cover plate to the back of the product (1),

and then remove the cover plate (2) and set it aside.

3.

Remove the replacement Jetdirect card from its packaging and insert the card into the card slot

ledge-side up, as shown.

a. Align the card with the guide rails in the slot.

b. Firmly press the card into the slot until the card is seated (2), and then secure the card with

the card plate screws (1).

ENWW

Install a Jetdirect card

79