HP Digital Sender Flow 8500 fn1 Document Capture Workstation series - Manual (Page 54)

4. Gently set the stack in the document feeder. Load the pages face up with the top of the pages
pointing into the feeder.
For best results, do not drop the stack into the feeder and do not tap the top edge of the stack after
you have placed it in the document feeder.
TIP: Avoid feeding a document with a leading edge that has been folded or frayed. When you
begin scanning, select a profile whose page loading selection matches the edge you are feeding
first to ensure that the scan reflects the orientation of the original document.
5. Verify that the paper guides are aligned with the edges of the stack.
Use the scanning glass
Place items that do not meet the specifications for the automatic document feeder (ADF) directly onto the
scanning glass.
Minimum size: No minimum size
Maximum size: 216 x 356 mm (8.5 x 14 in)
NOTE: Not all the length of the scanning glass is in the active imaging area, so make sure to position
your originals as indicated by the reference mark on the edge of the scanning glass.
Place the original face down on the scanning glass, as indicated by the reference mark. For landscape
pages, place the page face down with the top of the page pointing toward the back of the product.
46 Chapter 5 Load originals ENWW