Disabling shadow copies – HP ProLiant ML310 G3 Storage Server User Manual
Page 51
1.
Access Disk Management.
2.
Select the volume or logical drive, then right-click on it.
3.
Select Properties.
4.
Select the Shadow Copies tab.
5.
Select the volume that you want to redirect shadow copies from and ensure that shadow copies are
disabled on that volume; if enabled, click Disable.
6.
Click Settings.
7.
In the Located on this volume field, select an available alternate volume from the list.
NOTE:
To change the default shadow copy schedule settings, click Schedule.
8.
Click OK.
9.
On the Shadow Copies tab, ensure that the volume is selected, and then click Enable.
Shadow copies are now scheduled to be made on the alternate volume.
Disabling shadow copies
When shadow copies are disabled on a volume, all existing shadow copies on the volume are deleted as
well as the schedule for making new shadow copies.
CAUTION:
When the Shadow Copies Service is disabled, all shadow copies on the selected volumes are deleted.
Once deleted, shadow copies cannot be restored.
Managing shadow copies from the storage server desktop
The storage server desktop can be accessed by using Remote Desktop to manage shadow copies.
To access shadow copies from the storage server desktop:
1.
Access the storage server desktop from the primary navigation bar by selecting Maintenance >
Remote Desktop.
2.
Click My Computer.
3.
Right-click the volume name, and select Properties.
4.
Click the Shadow Copies tab. See
HP ProLiant ML310 Storage Server
51