beautypg.com

Using the direct attach method, Using the remote browser method, Direct attach method – HP ProLiant ML310 G3 Storage Server User Manual

Page 19

background image

Direct attach

To connect directly to the storage server without using the network.

Remote browser

To establish a browser-based connection to the HP ProLiant Storage

Server Management console from a remote client running Internet

Explorer 5.5 (or later).

Remote desktop

To establish a connection from a remote client without using a browser.

This method requires the client to have Windows remote desktop

capability.

HP Integrated

Lights-Out 2 (iLO 2)

To establish a browser-based connection from a remote client using

the iLO 2 interface.

For more information, see "

Planning for installation

" on page 15.

IMPORTANT:

An IP address can be substituted for a storage server's serial number and hyphen when using either

remote browser or remote desktop methods to access the HP Storage Server Management console. For

example: 192.0.0.1 can be substituted for TWT08466-.

Using the Direct attach method

You can access the HP Storage Server Management console using a monitor, mouse, and keyboard

directly attached to the storage server.
To connect the storage server to a network using the direct attach method

1.

Log in to the HP ProLiant Storage Server with the default user name administrator and the

password hpinvent.
The HP ProLiant Storage Server Management console and Rapid Startup Wizard will start

automatically.

NOTE:

You can change the administrator name and password when you configure the server

using the "

Rapid Startup Wizard

" on page 26.

2.

To complete network configuration using the Rapid Startup Wizard, see "

Configuring the server on

the network

" on page 25.

Using the Remote browser method

The storage server ships with DHCP enabled on the network port. If the server is placed on a

DHCP-enabled network and the serial number of the device is known, the server can be accessed through

a client running Internet Explorer 5.5 (or later) on that network, using the TCP/IP 3202 port.

IMPORTANT:

Before you begin this procedure, ensure that you have the following:

Windows-based PC loaded with Internet Explorer 5.5 (or later) on the same local network as the

storage server

DHCP-enabled network

Serial number or IP address of the storage server

HP ProLiant ML310 Storage Server

19

This manual is related to the following products: