HP ProLiant ML310 G3 Storage Server - Manual (Page 21)

NOTE:
If you are able to determine the IP address from your DHCP server, you can substitute the IP
address for the serial number and hyphen (-). For example: 192.100.0.1:3202.
2. Click OK on the Security Alert prompt.
3. Log in to the HP ProLiant Storage Server Management console with the default user name
administrator
and the password hpinvent.
NOTE:
You can change the administrator name and password when you configure the server
using the " Rapid Startup Wizard " on page 26.
4. To complete network configuration using the Rapid Startup Wizard, see " Configuring the server on
the network " on page 25.
IMPORTANT:
If you are using the remote browser method to access the HP Storage Server Management console and
Rapid Startup Wizard, always close the remote session before closing your Internet browser. Closing
the Internet browser does not close the remote session. Failure to close your remote session impacts the
limited number of remote sessions allowed on the storage server at any given time.
Connecting to the storage server permits you to access the HP Storage Server Management console
( Figure 3 ). From the console, you can access snap-ins that allow complete server system management.
HP ProLiant ML310 Storage Server 21