Completing system configuration, Running the rapid startup wizard, Rapid startup wizard – HP ProLiant ML310 G3 Storage Server User Manual
Page 26
Configuration Worksheet
Local area connection 2
Any additional local area connections can be renamed to prevent
confusion.
IP address
Same as above.
Subnet mask
Same as above.
Default gateway
Same as above.
iLO 2 settings
Change the host name, IP settings, and administrator settings.
DNS server
A Domain Name System (DNS) server name is required to provide
for domain name to IP address resolution.
WINS server
A Windows Internet Naming Service (WINS) server name is
required to determine the IP address associated with a particular
network computer.
Server Name
Server name
Assign a unique name to the storage server. This name identifies the
storage server on the network.
Running the Rapid Startup Wizard
The Rapid Startup Wizard is only displayed during the initial setup process. This wizard guides you
through the configuration process.
The Rapid Startup Wizard guides you through configuring the following system settings:
•
Date, time, and time zone
•
Administrator Identity (user name and password)
•
Alert e-mail notification
•
Integrated Lights-Out 2 (iLO 2) settings
•
Simple Network Management Protocol (SNMP) Settings
•
Network Interfaces
•
Server Name
For more information about the configuration settings available in the Rapid Startup Wizard, click Help
to see the corresponding Rapid Startup Wizard online help topic.
Completing system configuration
After the storage server is physically set up and the basic configuration is established, additional setup
tasks must be completed. Depending on the deployment scenario of the storage server, these steps can
vary. These additional steps can include:
•
Running Microsoft Windows Update—HP highly recommends that you run Microsoft Windows
updates to identify, review, and install the latest, applicable, critical security updates on the storage
server. For recommendations, instructions, and documentation to help manage the software
update, hotfix, and security patches process on the storage server, see Microsoft Software Updates
on HP ProLiant Storage Servers at
.
•
Creating and managing users and groups—User and group information and permissions
determine whether a user can access files. If the storage server is deployed into a workgroup
environment, this user and group information is stored locally on the device. By contrast, if the
storage server is deployed into a domain environment, user and group information is stored
on the domain.
•
Joining workgroup and domains—These are the two system environments for users and groups.
Because users and groups in a domain environment are managed through standard Windows or
Active Directory domain administration methods, this document discusses only local users and
26
Installing and configuring the server