HP ProLiant SL270s Gen8 SE Server - Manual (Page 46)

Hardware options installation 46
The minimum system requirement for the system board embedded HP Dynamic Smart Array B320i Controller
to support large Bar function is version P75 2013. 09 .08.
Before installing a coprocessor option, set the system maintenance switch position 9 to the setting indicated
in the table below:
Coprocessor model Number of coprocessor
supported
Switch position 9
setting
Intel Xeon Phi 5110P 1 - 8 On = Enabled
Intel Xeon Phi 7120P 1 - 6 On = Enabled
The system board embedded HP Dynamic Smart Array B320i Controller does not support large BAR function.
When the large BAR function is enabled, drive connection to the system board SATA/Mini-SAS connectors is not
supported. Connect installed drives to a storage controller board.
The minimum system requirement for the system board embedded HP Dynamic Smart Array B320i Controller to support large Bar function is version P75 2013. 09 .08.
Coprocessor model Number of coprocessor
supported
Switch position 9
setting
NVIDIA Tesla M2075
and M2090 1 - 8 Off = Disabled
NVIDIA Tesla
M2070Q, K20,
K20X, K40, K10, and
GRID K2
1 - 8 On = Enabled
Intel Xeon Phi 5110P 1 - 8 On = Enabled
Intel Xeon Phi 7120P 1 - 6 On = Enabled
The system board embedded HP Dynamic Smart Array B320i Controller does not support large BAR function.
When the large BAR function is enabled, drive connection to the system board SATA/Mini-SAS connectors is not
supported. Connect installed drives to a storage controller board.
The minimum system requirement for the system board embedded HP Dynamic Smart Array B320i Controller to support
large Bar function is version P75 2013. 09 .08.
GPU population rules
Observe the following population rules when installing a coprocessor or GPU in the server: