HP ProLiant SL270s Gen8 SE Server - Manual (Page 20)

Operations 20
— NVIDIA Tesla K10, K20, K20X, K40 and Intel Xeon Phi 5110P and 7120P
o Rear shipping plates
3. Install the server into the chassis (" Installing the server into the chassis " on page 31 ).
4. Connect the peripheral cables.
5. Power up the server (on page 15 ).
Remove the GPU cage
To remove the component:
1. Power down the server (on page 15 ).
2. Disconnect all peripheral cables from the server.
3. Remove the server from the chassis (on page 15 ).
4. Remove the shipping brackets and shipping plates (on page 17 ).