HP ProLiant SL270s Gen8 SE Server User Manual
Hp proliant sl270s gen8 se server user guide
Table of contents
Document Outline
- HP ProLiant SL270s Gen8 SE Server User Guide
- Abstract
- Notice
- Contents
- Component identification
- Operations
- Power up the server
- Power down the server
- Remove the server from the chassis
- Remove the hot-plug SFF drive cage
- Install the hot-plug SFF drive cage
- Remove the shipping brackets and shipping plates
- Install the shipping brackets and shipping plates
- Remove the GPU cage
- Install the GPU cage
- Remove the processor air baffle
- Install the processor air baffle
- Remove the PCI/FlexibleLOM riser cage
- Install the PCI/FlexibleLOM riser cage
- Setup
- Optional installation services
- Optimum environment
- Rack warnings
- Contents of the server shipping carton
- Installing the chassis
- Installing the chassis components
- Installing the server into the chassis
- Powering up the chassis
- Configuring the chassis
- Powering on and selecting boot options
- Installing the system software
- Registering the server
- Hardware options installation
- Introduction
- Connecting the SUV cable
- Drive options
- Controller options
- Expansion board or FlexibleLOM adapter option
- Mini-SAS Y-cable option
- GPU/coprocessor enablement options
- Processor option
- Memory options
- HP Trusted Platform Module option
- Cabling
- Software and configuration utilities
- Troubleshooting
- System battery
- Regulatory information
- Electrostatic discharge
- Specifications
- Support and other resources
- Acronyms and abbreviations
- Documentation feedback
- Index