HP ProLiant SL270s Gen8 SE Server - Manual (Page 40)

Hardware options installation 40
13. Install the FBWC capacitor pack into the holder mounted in the server tray.
14. Install the GPU cage (on page 23 ).
15. Install the SFF hot-plug drive cage (" Install the hot-plug SFF drive cage " on page 17 ).
16. Install the shipping brackets and shipping plates (on page 19 ).
17. Install all components removed from the server.
18. Install the server into the chassis (" Installing the server into the chassis " on page 31 ).
19. Connect the peripheral cables.
20. Power up the server (on page 15 ).
Expansion board or FlexibleLOM adapter option
To install either component:
1. Power down the server (on page 15 ).
2. Disconnect all peripheral cables from the server.
3. Remove the server from the chassis (on page 15 ).
4. Remove the shipping brackets and shipping plates (on page 17 ).
5. Remove the SFF hot-plug drive cage (" Remove the hot-plug SFF drive cage " on page 16 ).
6. Remove the GPU cage (on page 20 ).
7. Remove the PCI/FlexibleLOM riser cage (on page 25 ).