HP StorageWorks XP10000 Disk Array - Manual (Page 63)

63
Description
Enter a description for the migration group you are creating.
You can enter up to 500 bytes of UTF-8 characters.
If you enter 501 bytes or more in UTF-8 encoding for Description, an error occurs.
12. In the Migrate-Step 3 of 4 pop-up window, click the Next button.
The Migrate-Step 4 of 4 pop-up window displays as shown in Figure 7-9, prompting you to verify the
selected migration settings. Check the settings.
Figure 7-9 Migrate-Step 4 of 4 Pop-up Window
13. In the Migrate-Step 4 of 4 pop-up window, click the Confirm button.
When Execute Immediately has been selected:
The Migrate-Processing pop-up window and then the Migrate-Result pop-up window display in
succession.
The Migrate-Result pop-up window displays a message indicating that the migration task has started
successfully.
When Execute Immediately has not been selected:
The Migrate-Processing pop-up window and then the Migrate-Result pop-up window display in
succession.
The Migrate-Result pop-up window displays a message indicating that the migration task has been
created successfully.
14. In the Migrate-Result pop-up window, click the Close button.
Displaying the Settings of Migrate-Step n of 4 Pop-up Window #
In the Migrate-Step n of 4 pop-up window, when n is 2 or more, you can go back to the window of the
previous step by clicking the Back button or selecting the link on the upper left corner of the Migrate-Step
n of 4 pop-up window.
If you do the following, the specified settings are cleared:
1. In the Migrate-Step 3 of 4 pop-up window, click the Back button . The Migrate-Step 2 of 4 pop-up window
displays.
2. In the Migrate-Step 2 of 4 pop-up window, click the Next button. The Migrate-Step 3 of 4 pop-up window
displays with its settings cleared.
# n indicates a number from 1 to 4.
Performing a
Migration