HP ProLiant ML350e Gen8 v2-Server - Manual (Page 64)

Hardware options installation 64
7. Open the retaining bracket and remove the PCI slot cover.
8. Install the expansion board and close the retaining bracket.
9. Connect any required internal or external cables to the expansion board. See the documentation that
ships with the expansion board for more information.
10. If removed, install the PCI air baffle (" PCI air baffle option " on page 38 ).
11. Install the access panel (on page 26 ).
12. Return the server to an upright position.
13. Lock the front bezel (on page 24 ).
14. Connect each power cord to the server.
15. Connect each power cord to the power source.
16. Power up the server (on page 23 ).