HP ProLiant ML350e Gen8 v2-Server - Manual (Page 55)

Hardware options installation 55
14. Install the drive cage into the chassis.
15. Connect all the drive cables.
16. Install the fan modules and the fan blank (on page 31 ).
17. Install the full-length PCI expansion cards that were removed (" Installing an expansion board " on page
63 ).
18. Install the system air baffle (on page 28 ).
19. If removed, install the PCI air baffle (" PCI air baffle option " on page 38 ).
20. Install the access panel (on page 26 ).
21. Return the server to an upright position.
22. Install the front bezel (on page 25 ).
23. Connect each power cord to the server.
24. Connect each power cord to the power source.
25. Power up the server (on page 23 ).