HP ProLiant ML350 G5 Server - Manual (Page 62)

Hardware options installation 62
Tower-to-rack conversion option
The tower-to-rack conversion kit includes all equipment required to convert the tower model server into a
rack model server and to install the server into most square- or round-hole racks.
The tower-to-rack conversion kit includes:
• Rack rails
• Cable management arm
• Server rails
• Cage nuts
• Rack bezel
• Cable management arm extender bracket, included with the server
In addition to the supplied items, you may need:
• T-10 Torx screwdriver
• T-15 Torx screwdriver
To convert a tower server to a rack server:
1. Power down the server (on page 17 ).
2. Remove the tower bezel (" Open or remove the tower bezel " on page 18 ).
3. Remove the feet.
4. Remove both tower configuration panels.