HP ProLiant ML350 G5 Server User Manual
Page 47
Hardware options installation 47
WARNING:
To reduce the risk of personal injury or damage to the equipment, the installation
of power supplies should be performed only by individuals who are qualified in servicing
server equipment and trained to deal with products capable of producing hazardous energy
levels.
WARNING:
To reduce the risk of personal injury from hot surfaces, observe the thermal labels
on each power supply or module.
WARNING:
To reduce the risk of injury from electric shock hazards, do not open power
supplies. Refer all maintenance, upgrades, and servicing to qualified personnel.
CAUTION:
Electrostatic discharge (ESD) can damage electronic components. Be sure that you
are properly grounded (earthed) before beginning any installation procedure.
To install the component:
1.
Identify the redundant power supply bay ("
" on page
IMPORTANT:
Power supplies for the model shown are hot-pluggable. When using the
redundant power supply option, it is not necessary to power down the server before removing
or installing a power supply.
2.
Remove the power supply blank.
WARNING:
To reduce the risk of electric shock or damage to the equipment, do not connect
AC power cords to uninstalled power supplies.