HP ProLiant ML350 G5 Server - Manual (Page 41)

Hardware options installation 41
o Open or remove the tower bezel, as needed (" Open or remove the tower bezel " on page 18 ).
o Extend the server from the rack (on page 17 ).
3. Remove the access panel (on page 19 ).
CAUTION: Always populate each media bay with either a device or a blank. Proper airflow
can only be maintained when the bays are populated. Unpopulated drive bays can lead to
improper cooling and thermal damage.
4. Remove the media bay blank.
5. Install other hardware options as needed.
6. Install the access panel (on page 20 ).
7. Do one of the following:
o Close or install the tower bezel, as needed.
o Slide the server back into the rack.