HP ProLiant ML350 G5 Server - Manual (Page 49)

Hardware options installation 49
4. Push the release latches on the expansion board retainer and pull the retainer out away from the
chassis.
5. Remove the expansion slot cover.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless
all PCI slots have either an expansion slot cover or an expansion board installed.
Installing an expansion board
CAUTION: To prevent damage to the server or expansion boards, power down the server and
remove all AC power cords before removing or installing the expansion boards.
1. Power down the server (on page 17 ).
2. Do one of the following:
o Open or remove the tower bezel, as needed (" Open or remove the tower bezel " on page 18 ).