HP ProLiant ML350 G5 Server - Manual (Page 58)

Hardware options installation 58
b. Connect the extension to the first power connector of both system power cables.
17. Connect the power connectors on the power cable extension to any installed media bay devices.
Route the unused portion of the system power cables to avoid airflow restriction.
18. Install any other expansion boards (" Installing an expansion board " on page 49 ).
19. Slide the hard drive cage back into the chassis, and then secure the cage with the four T-15 screws.
20. Install the access panel (on page 20 ).
21. Do one of the following:
o Close or install the tower bezel, as needed.