HP ProLiant ML350 G5 Server - Manual (Page 50)

Hardware options installation 50
o Extend the server from the rack (on page 17 ).
3. Remove the access panel (on page 19 ).
4. Remove the expansion slot cover from the slot, if installed (" Removing the expansion slot cover " on
page 48 ).
IMPORTANT: It may be necessary to remove the slot cover next to the slot in which you are
installing a board.
5. Push the release latches on the expansion board retainer and pull the retainer out away from the
chassis.
6. Install the expansion board.
IMPORTANT: Be sure to install expansion boards in the appropriate type of expansion slot.
Most 32-bit expansion boards can be installed in a 64-bit PCI-X slot. However, PCI Express
expansion boards must be installed in PCI Express expansion slots only.
PCI-X video cards must be installed in slots 2 or 3 only.