HP Insight Management Agents - Manual (Page 65)

Power Supply Information
This information is not available for all types of storage systems.
•
Description displays the description of the power supply. The following values are possible:
Power Bay 1 - The power supply is installed in the first power supply bay. ◦
◦ Power Bay 2 - The power supply is installed in the second power supply bay.
◦ Power Supplies - This is a composite of all the installed power supplies.
◦ Unknown - The Storage Agents do not recognize the bay. You may need to upgrade your
software.
•
Status displays the status of the power supply. The following values are possible:
OK - A power supply is installed and operating normally. ◦
◦ Degraded - At least one of multiple power supplies has failed or lost power.
◦ Failed - A power supply is installed and is no longer operating. Replace the power supply.
◦ Not Installed - Nothing is installed in this power supply bay.
◦ Unknown - The Storage Agents are unable to determine if this storage system power
supply bay is occupied.
•
Serial Number displays the serial number of the power supply. Use this information for
identification purposes.
•
Board Revision displays the board revision of the power supply.
•
Firmware Revision displays the firmware revision of the power supply.
Temperature Information
This information is not available for all types of storage systems.
•
Description displays the description of the temperature sensor. The following values are
possible:
◦ Fan Bay - This temperature sensor is located on the fan module in the fan bay.
◦ Backplane - This temperature sensor is located on the SCSI drive backplane.
◦ Unknown - The Storage Agents are unable to determine the location of this storage system
temperature sensor.
•
Status displays the status of the temperature sensor. The following values are possible:
OK - The temperature is OK. ◦
◦ Degraded - The temperature is degraded.
◦ Failed - The temperature is failed.
◦ Unknown - The Storage Agents are unable to determine the storage system temperature
sensor status.
•
Current Value displays the current temperature value.
•
Limit Value displays the threshold value of the temperature sensor.
Fan Information
This information is not available for all types of storage systems.
•
Description displays the description of the fan module. The following values are possible:
Fan Bay 1 - This fan module is installed in the first fan bay. ◦
◦ Fan Bay 2 - This fan module is installed in the second fan bay.
Storage Agent 65