HP Insight Management Agents - Manual (Page 102)

•
Maximum Burst displays the maximum number of bytes which can be sent within a single
sequence of Data-In or Data-Out PDUs.
•
Number Connections displays the number of transport protocol connections that currently
belong to this session.
•
Maximum R2T displays the maximum number of outstanding request-to-transmit (R2T)s per task
within this session.
•
Error Recovery Level displays the level of error recovery negotiated between the initiator and
the target. Higher numbers represent more detailed recovery schemes.
•
Data Sequence in Order indicates the iSCSI data PDU transfer order. The following values
are valid:
◦ Yes - indicates that data PDU sequences must be transferred using continuously increasing
offsets, except during error recovery.
◦ No - indicates that iSCSI data PDU sequences may be transferred in any order.
•
Data PDU in Order indicates the iSCSI data PDU sequence transfer order. The following values
are valid:
◦ Yes - indicates that data PDUs within sequences must be at continuously increasing
addresses, with no gaps or overlay between PDUs.
◦ No - indicates that iSCSI data PDUs within sequences may be in any order.
Session Statistics Information
•
Command PDUs Transferred displays the count of Command PDUs transferred on this session.
•
Response PDUs Transferred displays the count of Response PDUs transferred on this session.
•
Data Octets Tranmitted displays the count of data octets that were transmitted by the local
iSCSI node on this session.
•
Data Octets Received displays the count of data octets that were received by the local iSCSI
node on this session.
•
Connection Digest Errors displays the count of PDUs which were received on the session and
contained header or data digest errors.
•
Connection Timeouot Errors displays the count of connections within this session which have
been terminated due to timeout.
Associated iSCSI Connections
There will be a connection link that is associated to the displayed session.
Connect Information
The information displayed for each iSCSI connection entry in the submenu includes connect
information.
102 Agent information