HP Insight Management Agents - Manual (Page 113)

•
iLO Security Override Switch—Displays the Integrated Lights-Out security state. The iLO
Security Override Switch field is supported only in case of Integrated Lights-Out models.
•
Mouse—Displays whether the mouse is connected to Remote Insight Board. The Mouse field
is not supported for Remote Insight Lights-Out models.
•
Keyboard—Displays whether the keyboard is connected to Remote Insight Board. The
Keyboard field is not displayed for Remote Insight Lights-Out models.
•
Interface Status—Displays the iLO interface status.
Alarm
If your system supports Remote Insight Lights-Out Edition, the following alerts are available:
•
Status—Indicates if alerts are enabled at the iLO. This is a global flag and governs all users.
If alerts are disabled, alarms are not sent.
•
Pending Alarm—Displays if the alert is unable to determine the state of the iLO, or if all alerts
have been delivered or if there are alerts pending that still need to be sent.
If your system supports the Integrated Lights-Out Edition, the following alerts are available:
•
Remote Insight Alerts—Allow users to enable or disable the alerts by clicking the button.
•
Host Alerts allow users to enable or disable the alerts by clicking the button.
•
Pending Alarm—Displays if the alert is unable to determine the state of the Remote Insight, or
if all alerts have been delivered or if there are alerts pending that still need to be sent
Battery
•
Battery Status—Indicates the status of the Remote Insight board battery. When the Remote
Insight board battery is enabled and there is a host power failure, the Remote Insight board
battery provides a minimum of 30 minutes of operation. This enables the Remote Insight board
to send alerts to the users that were specified during configuration.
•
Battery Condition—Displays the condition of the battery. The following values are possible:
•
Battery Charge—Displays the percentage of the charge in the Remote Insight board battery.
Power
•
Auxiliary Power—Displays whether or not the auxiliary power (External Power Cable and/or
Internal Power Cable, which is a 30-pin cable or a 16-pin cable) is connected to the Remote
Insight.
•
Virtual Power Button—Displays whether or not the virtual power button cable is connected to
the Remote Insight.
Modem/COM Port Settings
NOTE: The Modem/COM Port Settings is not supported for Integrated Lights-Out Edition or The
Remote Insight Lights Out Edition.
A series of tables is displayed providing information about any Remote Insight Board modems or
communication ports. The first table title indicates the type of device described like "Internal
Sub-system Classification 113