HP Color LaserJet Enterprise CP5525 Printer series - Manual (Page 121)

Repeating defects
If defects repeat at regular intervals on the page, use this ruler to identify the cause of the defect. Place
the top of the ruler at the first defect. The marking that is beside the next occurrence of the defect
indicates which component needs to be replaced.
Distance between defects Product components that cause the defect
35 mm Print cartridge (primary charging roller)
42 mm Print cartridge (developer roller)
50 mm Print engine (primary transfer roller)
61 mm Print engine (secondary transfer roller)
76 mm Fuser (fuser film)
78 mm Fuser (pressure roller)
94 mm Print cartridge (OPC)
Print the Supplies Status page
The Print Supplies Status page indicates the estimated life remaining in print cartridges. It also lists
the part number for the correct genuine HP print cartridge for your product so you can order a
replacement print cartridge, as well as other useful information.
1. At the control panel, press the Home button .
2. Open the following menus:
1. Administration
2. Reports
3. Configuration/Status Pages
3. Use the down arrow button to highlight the Supplies Status Page item, and then press the
OK button to select it.
4. Use the up arrow button to highlight the Print item, and then press the OK button.
ENWW Solve problems with supplies 105