HP Designjet T1120 Printer series - Manual (Page 51)

3. Select Paper load.
4. Select Load roll.
5. Select your paper category and type.
TIP: If you have loaded a paper type whose name does not appear in the paper list, see The
paper type is not in the driver on page 144 .
6. Continue with step five of the easy loading process, skipping steps eight and nine.
TIP: When prints fall into the basket, they can be torn or get ink marks from other prints. To avoid this,
catch your prints as they are cut from the roll and do not stack prints in the basket. You can also turn
off the automatic cutter, see
Turn the automatic cutter on and off on page 53 , and release your print
using the Form feed and cut key .
Load a roll into the 44-inch printer
There are two ways to load a roll. The easy loading procedure is recommended.
CAUTION: To start these procedures you must have a roll loaded on the spindle. See Load a roll onto
the 44-inch spindle on page 36 .
42 Chapter 5 Paper handling ENWW
Pa
p
er ha
nd
lin
g