HP Designjet T1120 Printer series - Manual (Page 49)

4. If the edge of the roll is not straight or torn (sometimes due to tape used to hold end of the roll),
pull paper slightly beyond the cutting groove and use a cutter to cut a straight edge.
TIP: Cut the paper as straight as possible, as uneven paper does not load correctly.
5. Insert the edge of the paper into the feeder.
WARNING! Do not push your fingers inside the printer's paper path.
6. Roll the spindle into the feeder until you feel resistance. The printer detects the paper and feeds it
automatically into the printer.
7. Once the paper is fed into the printer, the front-panel display asks if you are loading a roll or a
sheet. Select Roll with the
Up and Down keys and press OK .
40 Chapter 5 Paper handling ENWW
Pa
p
er ha
nd
lin
g