HP LaserJet 9000 Printer series User Manual
Page 46
Chapter 2
Printing tasks
46
Printing envelopes
To print envelopes from a program
1
Load envelopes into optional Tray 1.
2
In your program or in the printer driver, specify optional Tray 1 or Automatic. Or, select the paper source.
3
Set the appropriate envelope size and type. For envelope specifications, see the introduce guide on the
product CD, or go to
4
If your program does not automatically format an envelope, specify “Por trait” for page orientation.
CAUTION
To avoid a printer jam, do not remove or insert an envelope after you begin printing.
5
Set margins to within 15 mm (0.6 inch) from the edge of the envelope. For best print quality, set margins
for a return and mailing address (typical address margins for a Commercial #10 or DL envelope are
offered). Avoid printing over the area where the three back flaps meet on the back of an envelope.
6
To print by type and size of paper, see the introduce guide on the product CD, or go to
.
7
Select the standard output bin (the default) as the output location. If you print envelopes to the stacker or
stapler/stacker, they exit to the face-up bin of that accessory.
8
When finished, return the fuser levers to the down position.
CAUTION
Failure to return levers to the down position for standard paper types can result in poor print quality.